Hammerite Areosol Smooth Finish Blue 400ml 045351

Hammerite Direct to Rust Smooth Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. Application Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages. Health & Safety Flame, Exclamation mark Danger. Contains HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, less than 5% N-HEXANE. Extremely flammable aerosol. Causes skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Pressurised container- may burst if heated. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use. IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F. Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction. Specifications Finish: Smooth finish Coverage: Aerosol - 400ml covers up to 0.5m² Drying Time: Aerosol - Touch dry in 1-2 hours, recoat after 15 minutes (wet-on-wet) Coats: 3 Direct to rust