Hammerite Radiator Enamel Areosol Gloss White 400ml 167239

Hammerite Radiator Enamel is specially formulated to provide a heat resistant, brilliant white finish on domestic water filled household radiators and hot water pipes. Provides a tough long lasting finish. Application Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages. Health & Safety Causes serious eye irritation. Extremely flammable aerosol. May cause drowsiness or dizziness. Pressurised container: May burst if heated. Repeated exposure may cause skin dryness or cracking. Key Information Finish: Gloss Coverage: 0.5m² per litre Drying Time: Touch dry in 1-2 hours, recoatable in 15 minutes (Wet-on-wet) Coats: 4