Dulux Trade Quick Drying Undercoat White 1Ltr

Dulux Trade Quick Dry Undercoat is part 1 of an advanced 2 part water-based, high gloss system, with excellent opacity and coverage. It is specifically designed to provide the best top coat finish with Dulux Trade Quick Dry Gloss, but can be used on all interior wood and metal. Specifications Product Type: Paint Drying Time (Recoat): 4-5 hours Drying Time (Touch Dry): Dependent on temperature and humidity Suitable Surface: Ferrous Metals, MDF, Wood, Metal, Non-Ferrous Metal Coverage: Up to 10m² per litre General No. of Coats: 2 Application: Apply by brush, roller or spray. For best results use a good quality synthetic (nylon polyester) brush or a short pile synthetic/mohair roller designed for the application of water-based paints. STIR THOROUGHLY BEFORE USE. Apply 1 or 2 coats of Dulux Trade Quick Dry Undercoat, as required, followed by 1 or 2 coats of Dulux Trade Quick Dry Gloss. Where a strong colour change is involved, 2 coats will be required. Newly painted doors and windows should not be closed (tightly) until the paint is fully dry. Airless Spray: For best results use a 208 or 308 Fine Finish tip @ 1100 - 1500 psi. (80 – 100 bar). HVLP: For best results use a 1.8mm Fluid Set. This paint may be susceptible to sagging when applied above 75 microns. For this reason, HVLP is the safer option as this method is naturally slower and more gentle and therefore easier to control. The use of airless spray should only be considered by a competent and experienced sprayer for these products. Cleaning: After use, remove as much paint as possible from equipment before cleaning with water. Storage: Do not use or store in extremes of temperature and protect from frost.